English
French
German
Italian
Japanese
Russian
Spanish
30 Large Resin Shaker Films 4x6-inch
SKU: 4942=30
How to Create Shaker Arts Using A Shaker Mold？
| 1. Pour resin into the shaker mold | 2. Wait for the resin to fully cure, demold | 3. Add polymer slices into the empty of the completed resin |
|
4. Apply glue or resin around the edges of the plastic sheet, sealing the gaps |
5. Inject shaker sand oil into the beside small holes | 6. Seal the small hole with glue. Done! |
Special Techniques for Crafting
| Start by marking the desired sizes on a sheet of plastic film using a marker. | Remove the protective film before covering with the plastic sheet. | Small holes in the side of the mold for injecting oil with a needle. |
Transparent plastic sealing films for jewelry making, epoxy resin or uv resin casting
Shaker films dimension each one approximate:8.26x5.9x0.01inches/21x15x0.025cm (peel the cover before use) A5 size
Rectangular sheet, cut in varied shapes as your need.Seal the shaker with clear film. Easy to stick and does not leak
Make water fall Jewelry keychain or quicksand bag charms or snow globe effect room decor or cabochons on phone cases
Shaker films features:
- Material: PET plastic
- Safe and tasteless
- Transparent and visible
- With a protective cover to protect your sealing pieces from dust
Shaker films using tutorial:
1. Pour resin into the mold and demold when fully cured.
2. Outline the shape on the film (protected by a wrap that can be removed along with the mark).
3. Cut out the shape, ensuring it is slightly larger than the inner shape but smaller than the outer shape.
4. Fill the cavity with glitter, confetti, or mini pearls as desired.
5. Glue the film to the shaker and consider applying an additional layer of UV resin to prevent leakage.
6. Inject baby oil through the hole on the side using a precision-tip bottle, then seal the hole with UV resin.
EAN:8381314736826
Model Number:4942=30
You may also like
More from CLAY/CONCRETE CRAFT SUPPLY
Recently viewed